Episode 23: Paint Prep And…..we’re back! Hey guys, so sorry for the delay in new episodes over the last month or so. We’ve all been super busy throughout the start of the summer. RaceTech moving into new offices, Jarred & Brady working on new bikes,

Episode 22: ‘How to Build a Cafe Racer Guide’ Review Awhile back, we posted this article after a listener told us about Jim March’s “How to Build a Cafe Racer” guide. We skimmed through it, but never really went over it in detail or discussed it.

  Episode 21: All About Suspension w/ Ed Sorbo from Lindeman Engineering If you’re a couple episodes behind, you don’t want to miss this one! We met Ed Sorbo, owner of Lindeman Engineering at Deus Ex Machina’s Saturday School event in April.

Episode 20: Top End Rebuilds Part 2 Episode 20 continues with Part 2 of our series on Top End Rebuilds. We pick up where we left off after describing disassembly of your motor to prepare for a top end rebuild.

Episode 19: Top End Rebuilds Part 1 Episode 19 is part 1 in our series about rebuilding the top end of your motor. This episode will cover disassembly of your top end, and goes over the important components of the motor top end as well.

Episode 18: How Motors Work This show is all about motors. 4-Stroke & 2-Stroke motors. The kind we all use on our motorcycles.  In this show we describe the important components in a motor (we’ve done shows detailing most of these components you can re...

Episode 17: Valve Adjustments Let’s talk about valves. Well, listen to the start of the episode…not valves exactly, but valve adjustments! This is a critical maintenance item that often gets overlooked or put off, because you don’t know how to do it.

Episode 16: All About Triumphs NOTE: Massive apology to Trophy Motorcycles in San Diego about the confusion caused in this episode. This episode now has a section edited out consisting of a rant by Evan (after a few beers) about a bad experience years ...

Episode 15: Regular Maintenance Hey MMers! Episode 15 is all about regular maintenance items. Not alot of description needed here, or notes, just take a listen! We cover all the regular things you should check, adjust,

  Episode 14: Carburetor Tuning Episode 14 is the second part in our series on Carburetors. If you haven’t listened to Episode 13, I would recommend doing that first.  Assuming [ … ]